37-ecat Product Catalog
80-services Services
39-magazine Magazine
36-downloads Downloads
35-contact Contact
47-chevron-right
20-close First-Hand News?

Obtain news and background information about sealing technology, get in touch with innovative products – subscribe to the free e-mail newsletter.

A man in a mask looks at the test bench of a machine in a factory.
26.03.2024

Putting Robotic Parts Through Their Paces

The interplay of gears, lubricants and seals determines how precisely and trouble-free robots can function, making the ability to thoroughly test this interaction in advance all the more important. The test facility in Weinheim offers more than standard cycles.

Robots do have arms, but they don’t have muscles. So the joints of a robot are unable to move without a drive system. And every drive system needs lubrication as well as a seal. “Robots at work often execute very demanding movements,” said Dr. Daniel Frölich, Head of Engineering at Freudenberg Sealing Technologies. The driveshaft moves in one direction and then switches to another, sometimes with high acceleration. “There is enormous diversity,” added Holger Sattler, Design Engineer, Product Development. “A typical industrial robot has six axes, and every axis has a different profile and rotates differently. And the gripper usually has to move more quickly than the arm.”

42-quote

Robots often execute very demanding movements.

More Than Standard Test Cycles: Weinheim Test Facilities

So how do manufacturers determine whether the interaction of the components is working properly in this complicated sequence of movements – especially with regard to seals and lubricants? Testing the robot itself is expensive. Simulations under highly realistic conditions make more sense. In Weinheim, Freudenberg Sealing Technologies has established one of Europe’s largest sealing test facilities in Europe. Around 250 test cells are on the floor. “Here we can adjust everything from rotational speed ramping to temperature and pressure,” Frölich said. The service is not only available to its own operations but to other companies as well. After all, standard testing cycles often cannot handle the diverse nature of today’s robotics. In some cases, growing numbers of robot manufacturers and suppliers do not know how their gearboxes will ultimately be used. “We work very closely with our customers. Active consultation is crucial,” Sattler said.

Testing: The wide range of robotics today increasingly poses an obstacle to standard testing cycles. But detailed tests can be carried out at the test facility in Weinheim.

Robots With Greater Precision and Smaller Installation Spaces

In addition, technological advances are increasing the demands on robots: Rotational speeds continue to increase, cycle times are in decline, machines are becoming more precise – even as installation spaces for gearboxes are becoming smaller and smaller. “Even the lubricants continue to advance,” Frölich said. “But that can bring unexpected physical-chemical reactions, and the lubricants act on the seals more aggressively.” And this in turn can be devastating for a robot’s operating life. Long lifespans have become the rule in robotics.

This makes it all the more important for the interaction of the gearbox, lubricant and seal to be thoroughly tested – at challenging temperatures and rotational speeds. Though it was first largely established to meet the company’s own needs, more and more customers have come to appreciate the test facility in Weinheim. “There was increasing demand from outside the company, and we noted how the services made sense for many manufacturers,” Frölich said. “To help our customers even more when problems with a radial shaft seal’s tribological system arise, the Oil Seals Industry Division established the ‘Simmerring® Engineering’ service department.”

To be sure, there are universities and labs that make test facilities available. “But we naturally have an advantage: We offer expertise on sealing systems that other institutions cannot provide in depth,” Sattler said. “We don’t just send the usual tables with figures. We derive recommendations for action from them.” The bottom line is that manufacturers want recommendations that are as constructive as possible, regarding the potential impact of lubrication adjustments on the overall system, for example. “This often relates to the optimization of new products,” Frölich said. “Robots were once work machines. Today even minimal films of moisture are no longer tolerated.”


More information on the services of ‘Simmerring® Engineering’ can be found at: https://www.fst.com/de/corporate/services/global-simmerring-engineering/


More Stories About Technology

Mockup of ESSENTIAL magazine issue May 2024

Our Magazine

Technologies and trends that impact our business.

Order Now!

Login with your access data

* mandatory field

Forgot your password? Click here to reset.

Or

Don’t have an account yet? Register now!

You've logged in successfully.

Register and get access to exclusive content

Your benefits

  • Download exclusive documents such as Solution Sheets
  • Live Webinare/On-Demand Recordings on the beverage and food industry
  • Virtual tours of production facilities
  • Resistance tools for selecting the right material

Security Level

* mandatory field

Or

Do you already have an account? Continue to Login.

Thank you. Your subscription was successful.

We have sent you an e-mail. Please click on the included activation link to complete the registration.

Have you forgotten your password?

Please enter your email address to reset it.

* mandatory field

The form has been successfully sent.

We have sent you an email. Please click on the included link to assign a new password.