Expertise That Covers the Full Range
Sealing and Storage Solutions for Use in Fluid Technology and Handling, Power Generation and Transmission
We are experts when it comes to the generation, storage and transmission of power and energy in the most diverse fields and applications of industrial technology. This involves industrial engines and transmissions, pumps, cylinders, valves and actuators, brake systems, axles, wheel hubs and tire pressure control systems. It is all about pressure-, temperature- and media-resistant, efficient, reliable and durable sealing solutions and accumulators. Both standard and special tailor-made solutions that meet every requirement. All from a single source: Freudenberg Sealing Technologies.
Setting Progress in Motion
Sealing Solutions for Power Transmission
In dynamic power transmission, power and kinetic energy are directed to where they are needed. Industrial gear units convert torque and speed so that systems can perform their function perfectly. Mechanical power transmission also takes place at many other points in technical systems, in bearings, clutches, axles or brakes, for example.
Such operationally relevant functions require reliable sealing solutions. Here, Freudenberg Sealing Technologies’ uniquely broad range meets even the highest demands. Special developments in the premium segment stand out, such as Modular Sealing Solutions (MSS) or highly wear-resistant FKM materials.
The task of this high-tech seal is to combine increased reliability and service life with increased efficiency. Reliable and efficient mechanical drive components make groundbreaking developments in industry and agriculture, advances in infrastructure and transportation, and global megatrends, like digitalization, possible.
Innovation Is Not a Matter of Chance
In order to develop customized solutions for transmissions, brake systems, axles, wheel hubs or tire pressure control systems (CTI), not only the know-how of experienced, innovative engineers but also modern technical equipment are needed. This includes the world’s largest test facility for Simmerrings®. Extensive series of tests allow for the interaction of the seal, the lubricant and the rotating shaft to be determined precisely matched to the application – for optimally matched, efficient tribological systems.
Besides dynamic resistance and tightness tests, we also offer a wide range of other sophisticated engineering services. These include damage, shaft and bore analyses, installation studies, benchmark tests, finite element analyses and much more.
How can we help you?
Simmerring® Shaft Seals
Premium-quality Simmerring® shaft seals have a proven record of durability and longevity in a variety of applications. The seals incorporate the cutting-edge materials 72 NBR 902 and 75 FKM 585 for long life and low friction while handling the pressures of non vented gearboxes. Simmerring® shaft seals are available in imperial and metric sizes.
eCON: Electrical Conductive Sealing Solution
The Simmerring® shaft seal with electrically conductive nonwoven fabric eliminiates this risk through a fleece ring glued onto the air side of the seal. Because the carbon fiber-PTFE nonwoven material contacts both the shaft and the housing, the design forms a conductive bridge which grounds the gear box preventing mechanical system damage.
In addition to the conductive bridge, the fleece ring also excludes contamination from the primary sealing lip.
Modular Sealing Solutions
By combining two sealing elements in one component, Modular Sealing Solutions (MSS) from Freudenberg Sealing Technologies offer high performance in a small space. The patented MSS1 sealing system is a prime example. This one-piece sealing solution combines a Simmerring® as a base module with an inner upstream seal whose sealing lip is sinusoidal. This design offers industrial gear units and pumps exemplary protection against dirt and contamination, such as metal abrasion, even under difficult application conditions of up to 20,000 operating hours – with low friction!
2K Pump Housing
Freudenberg’s innovative 2K pump housings are made from plastic for oil or water circulation and offer significant weight reduction over traditional pump housings.
Freudenberg Sealing Technologie’s 2K-Housing serves to protect electrical components from vibration and environmental damage.
Wear-Resistant 75 FKM 260466
75 FKM 260466 is an especially wear-resistant material made of fluoro rubber that has been specifically developed for use in synthetic oils, especially polyglycols.
The BlueSeal is one design suited for future engine dynamic sealing. This patented radial shaft seal technology offers weight savings of 40 percent compared to a conventional seal, and it requires only half as much installation space.
Freudenberg Sealing Technologies manufactures multipole encoders that are used in wheel bearings, drive shafts, gear shafts, crankshafts, and camshafts of internal combustion engines, axial piston engines, wind turbines, and other applications.
O-Ring Solutions for Engine Coolant Systems
Freudenberg Sealing Technologies produces a wide variety of superior quality O-rings in different materials for many applications.
Sealing covers from Freudenberg Sealing Technologies provide reliable and customized sealing. Our sealing covers are available with additional functions and a wide variety of dimensions, designs, and materials.
Simmerring® Radial Shaft Seal Standard program Design A/AS
The original Simmerring® is a premium quality radial shaft seal conforming to DIN 3760 and ISO 6194-1 with an elastomeric outer diameter. The Simmerring® can be used in numerous original equipment applications across a broad spectrum of market segments (e.g., gearboxes, transmissions, axles, engines, and pumps).
E-Mobility Plug & Seal Connectors
An important and decisive factor in E-Mobility applications such as Battery, power electronics and E-Motor is the thermal management. Plug & Seals are rubber-coated pipe sections that create a safe, leakfree connection between the elements of the thermal management system, enabling an efficient heat transfer between the heat source and the heat consumer.
EMI Shielding for Thermoplastic Housing
Electromagnetic interference (EMI) shielding is the practice of reducing the electromagnetic field by blocking the field with barriers made of conductive or magnetic materials.
The Simmerring® MSS 1
The MSS 1 Simmerring® is a unique, patented sealing system with proven functionality in different gearbox and pump applications and with a service life time up to 20,000 hours.
Experience Freudenberg Sealing Technologies, its products and service offerings in text and videos, network with colleagues and stakeholders, and make valuable business contacts.Connect on LinkedIn!